A Rolling gate rests and rolls on the ground wheel carrier. It is always the size of the opening of gate; whereas a Cantilever slide gate ( Figure 2) is 50% longer than the opening so it is held above ground (about 6"), as it slides and in closed position the extra length (counter balance) is held between the cantilever rollers which are mounted on the posts, 2 above and 2 below.
GALVANIZED, BLACK, GREEN & WHITE 4ft, 5 ft, 6 ft, 7 ft, 8 ft and 10 ft High and upto 20 ft Long Openings. Click on Size menu.
The Complete Rolling Gate kit includes all the parts, including for Frame assembly with in-fill (chain link mesh and it's hardware) material, all Posts, Tracks, & Hardware kit (shown circled in red in detail picture). For horizontal tracks 1-5/8" pipe is included. Gate and Latch Post are 2-1/2" OD, Inline Track Posts are 2" OD. All you need is to buy cement to install the posts. These gates are ideal for situations where rolling gate is required but there is no room for counter balance on the side as in cantilever gates.
These gates are all clamped together and require no welding or welder (unless you want to weld it and know or are a welder yourself.). usually the gate should be slightly shorter than the fence height to allow for the wheel carrier at the bottom that adds to height. Only common tools required to assemble and install. a perfect choice for DIY projects!